Zadvizhka-s-jelektro-privodom

Advantage of TEA gate is to use foreign gear-motors, advanced inductive sensors, torque-limiting clutch (preventing the drive from damage in case of gate seizure).

 Application

Gate is designed to regulate grain discharge from silos, bins and equipment. It is used at granaries, grain warehouses, harbors, mills and bread baking complex.
pdfGates with electric drive 300х300 на F300 pdfGates with electric drive ЭЗ-400х600
pdfGates with electric drive TEA pdfGates with electric drive EZ-500х900
pdfGates with electric drive EZ-300х600  

Configuration

Casing of gate mechanism and electric drive are main assemblies. The casing is welded of sheet steel, it has a cut and gate rails in its middle part. Flanges of L-steel are welded to end parts of casing. Gate mechanism includes gate with laths, a shaft of gate drive with pinion and coupling. It is operated by gear-motor made in Italy with power of 0.25 kW. Gates are produced of two types: Type A – with two openings both having square section, Type B – with one opening having square section and other with round section.

Operation

During activating a signal to open or close the valve an electric motor starts and transfers a torque through a reduction gear to the drive shaft gear. When rotating the gear wheels, the racks engaging with them move with the valve by opening or closing the gate. When setting the gate in required position an inductive sensor of triggering off the gates is activated.

Electrically-driven gates Type TEA

Technical data

U8-TEA-15

U8-TEA-16

U8-TEA-18

Opening section, mm

300х300

200х200

350х350

Time for gate opening, sec.

6

6

6

Drive power, kW

0,25

0,25

0,25

Weight, kg

52

44

55

Gates EZ for conveyors

Technical data

EZ-300x600

EZ-400x600

EZ-500x900

Opening section, mm

300х600

400х600

500х900

Conveyor Type

KS-300

KS-390

KS-400

Drive power, kW

0,25

0,25

0,25

Weight, kg

54.2

52.4

80.8

 

Warranty

All types of gates are produced in accordance with Technical Specifications and Gostehknadzor requirements and in accordance with international standards valid for these products. The factory manufactures and supplies spare parts and components for all types of electrically driven gates and provides with warranty and post-warranty repair.