Auger-type discharger RSH-1
| Technical data | |
|---|---|
| Overall dimensions, LхWхH, mm | |
| Drive power, kW | |
| Capacity, t/hr | |
| MTBF, hr | |
| Average lifetime, years |
| RSH-1 | RSH-1A |
| 4006х3352х1000 | 3160х2792х900 |
| 24.2 | 18.3 |
| 50-100 | 22190 |
| 9000 | 9000 |
| 20 | 20 |
Auger-type discharger RSH-1 is used at the grain-producing plants for unloading hard-flowing products from hopper silos. It eliminates arch formation inside the silo and bridging of product.
The main advantages of auger-type dischargers manufactured by Sevkavelevatorspetsstroy Corporation, LLC, against the foreign analogues are the following:
- Availability of permit issued by the Federal Service for Ecological, Technological and Atomic Supervision, availability of conformity certificate GOST and hygienic certificate.
- Reliability of construction. Using the reinforced beam along the entire length of auger eliminates any deflection of the structure. Availability of two free-wheeling clutches preventing the auger backward running and ensuring smooth and uniform operation of the product. Use of slipring eliminates the power wiring inside the silo.
- Use of advanced materials and components in production process. Gear-motors are made by Bauer, Germany. Bearings are made in Germany and Japan. Sliprings are made in Germany.
- Long-term lifetime of products.
- Low price against the foreign analogues.
- No expenses for customs clearance formalities and transportation from abroad.
Auger-type discharger is manufactured in accordance with the Technical Specifications and Gosgortechnadzor Requirements, as well as in accordance with the international standards for this product. The plant manufactures and supplies spare parts and components for this discharger and provides warranty repairs.
The discharger is a steel structure composed by a working zone of augers and a general collection auger. The working zone consists of six augers of the right and left spiraling directly contacting with the product, and conveying it from the edges to the center to the collection auger.
The effect of agitating and mixing the product occurs due to the use of augers with different spiraling. The product is additionally mixed and agitated in the collection auger and then it is conveyed to the discharge branch conduit.
