Belt Conveyor
| Technical data | |
|---|---|
Capacity, tons/hr  for density 0,75 t/m3 |
|
| Error-free running time, hr | |
| Average service lifetime, years | |
| Belt speed, m/sec. | |
| Belt width, mm | |
| Overall length for conveying, m |
| LT-150-500 | LT-250-650 | LT-400-800 |
| 50-150 | 175-250 | 350-400 |
| 18000 | 18000 | 18000 |
| 20 | 20 | 20 |
| 2.7 | 2.7 | 2.7 |
| 500 | 650 | 800 |
| 300 | 300 | 300 |
Belt conveyors are designed for horizontal, slightly sloping and inclined, horizontal and inclined conveying of grain and products of its processing. They are used for grain storage silos, grain warehouses, harbors, mills and bakery complexes.
The main advantages of belt conveyors manufactured by Sevkavelevatorspetsstroy Corporation, LLC, against the foreign analogues are the following:
- Availability of permit issued by the Federal Service for Ecological, Technological and Atomic Supervision, availability of conformity certificate GOST and hygienic certificate;
- Reliability of construction;
- Use of advanced materials and components during production. Bearings are made in Germany and in Japan. Rollers of special series are made of a pipe with use of self-centering bearings. Gear motors are made by Bauer (Germany) and Motovario (Italy).
- Long-term lifetime of products;
- Low price against the foreign analogues;
- No expenses for customs clearance formalities and transportation from foreign countries.
All types of belt conveyors are produced in accordance with Technical Specifications and Gostehknadzor requirements and in accordance with international standards valid for these products. The factory manufactures and supplies spare parts and components for all types of belt conveyors: tension and drive stations, movable pulleys and drive pulleys, rollers, roller carriages, conveying belt, branch pipes and other components.
Belt conveyor consists of frame, two end drums on drive and tension stations respectively, return pulleys, rotary drum, belt bending these drums, upper trough and straight bottom roller carriages mounted on conveyor frame and supporting a belt. Drive drum (pulley) rotates by means of gearbox. It is possible to use motor-drum. Belt operates as traction and carrying mechanism of conveyor. Conveyor frame consists of three sectors: tension and drive stations and intermediate part for roller carriages to be mounted to. Tension station is produced of two types: screw type (at small length of conveying) and cargo type (at long length of conveying). Roller carriages withstand a belt along the conveyor and make it a shape of trough in operating part.
Raw material is passed by gravity spout through bulk trough to the conveying belt that is a towing working mechanism of conveyor. Then, under the pulling force transferred to the belt from electrical motor of drive station, and the product is conveyed by work (trough) branch to dropping case.
